image

In-line filters are the critical final safeguarding component in any compressed air system, catching the contaminants that compressors and dryers alone can't fully eliminate. The FFA series filter range is built specifically for this role, providing effective dust and oil removal so that downstream equipment and processes receive genuinely clean compressed air. As part of a broader compressed air accessories in Sri Lankan setup, in-line filters are typically the last line of defence before air reaches sensitive tools or products.

The FFA series filters work by capturing solid particulates and residual oil content as compressed air passes through the in-line filter, addressing two of the most common contamination risks in any pneumatic system. This dust and oil removal function matters most in applications where even small amounts of particulate or oil carryover can damage equipment, contaminate a product, or compromise a finished surface.

Performance isn't just a manufacturer's claim, the FFA series filter is built to meet the compressed air quality standards outlined in ISO 8573.1:2012, giving facilities a recognised benchmark to reference when specifying equipment or demonstrating compliance to clients and auditors. Being ISO 8573.1 compliant is particularly valuable in regulated or quality sensitive industries, where documented air purity can be as important as the filtration performance itself.

In-line filters like the FFA series are suitable for a wide range of cases from general workshop air lines needing basic dust and oil removal, to more demanding manufacturing environments where consistent adherence to compressed air quality standards is non negotiable. Positioning the filters correctly in the system, typically after compression and drying, ensures the compressed air feeding tools, instrumentation, or process equipment remains within the ISO 8573.1 compliant range throughout operation.

Flexibility comes from how easily the FFA series filter integrates into an existing setup. It works alongside refrigeration or adsorption dryers as part of a layered approach to air treatment, rounding out a facility's compressed air accessories in Sri Lanka investment with a straightforward filtration stage to retrofit into most existing compressed air lines.

Technical information

The FFA Series is a threaded-type compressed air filter line built from aluminium housings, rated to a maximum operating pressure of 16 bar g (standard) or 40 bar for the H4 high-pressure variants, across an operating temperature range of 1-60°C. 

Filters ship complete with an auto drain and differential pressure gauge (standard models), H4 high-pressure models use a manual drain as standard. Maximum recommended pressure differential before element change is 0.6 bar g (except Grade C).

 Five filter grades are offered: P (Particulate, down to 3 micron), U (Oil Removing, down to 1 micron / 0.1 mg/m³ oil), H (Coalescing, down to 0.01 micron / 0.01 mg/m³ oil), S (Super Fine, down to 0.01 micron / 0.001 mg/m³ oil in H+S combination) and C (Activated Charcoal, oil down to 0.003 mg/m³ in H+C combination, plus odour removal).

FFA Model (standard, 16 bar)

Approx. Capacity (m³/min)

Replacement Element

High-Pressure (40 bar) variant

FFA05

0.66

AEA05

–

FFA08

0.96

AEA08

–

FFA10

1.32

AEA10

FFA10-H4

FFA15

1.98

AEA15

FFA15-H4

FFA20

No info

AEA20

FFA20-H4

FFA40

No info

AEA40

FFA40-H4

FFA60

9.00

AEA60

FFA60-H4

FFA75

13.32

AEA75

FFA75-H4

FFA125

17.46

AEA125

FFA125-H4

FFA175

26.16

AEA175

–

FFA250

37.50–37.60

AEA250

–

FFA500

46.62

–

–